Settings For Wireless Broadband For BSNL Dataone

Posted By: KP On July 20, 2009 Under Internet, Tips and Tricks, Windows Tricks Categories

Connectivity and Disconnect problems may not be only from BSNL end but your settings may also responsible for disconnection of BSNL broadband. Also read how your line connection affects your broadband connection-disconnection.

Basic wireless router is available in Type II modems. The type 2 modem comes with one LAN port and Wi-Fi router.

To use wireless internet you are suggested to make the network security enabled, so you can stop it’s unauthorized use.

To secure wi-fi modem follow below steps:

  1. Visit your router page,  usually http://192.168.1.1/
  2. Login to Admin Panel
  3. Change your admin password (For UTSTARCOM WA3002-g1 and WA3002-g4 modem go to “Maintenance” tab in admin panel)
  4. Now visit Interface Setup page and select wireless. If you can’t find this tab in your modem find place where you can change wireless settings.

Access Point: Activated

Authentication Type: WPA2-PSK

Encryption: AES

Pre-Shared Key: Enter any key, you need to enter it to access your wi-fi network, Remember it.

Now you get two options further:

Start internet as you switch on modem else start it when you connect you from PC or Laptop.

1. Start Internet as per your need from Laptop or PC

Warning: If you using internet on multiple PCs do NOT use this method.

In this method we will set Dataone Modem in Bridge mode.

Go to your internet page and select bridge from list and save it.This setting usually comes under “Interface Setup”.

bsnl dataone settings

Now restart modem.

Go to Control Panel –> Network. Create New Connection , Choose connect to Internet, Setup Dial up connection. Enter Given Username and Password. (BSNL gives this, you can recover from modem)

I am not writing exact steps as it varies from OS to OS. Dial the connection whenever you need it. Disconnect it

2. Start Internet as you switch on modem (Multi PC mode)

Set options as shown in below image, enter your username and password given from BSNL.It’s PPPoE mode for internet connection.

dataone PPPoE mode

Save settings, restart modem.

You need not to set anything from you computer. Internet will connected as modem is switched on and ADSL link is connected.

Still if you get problem or doubt free to comment.



Share with Friends ( Sharing is Caring! )


Subscribe For E-mail Notification Of Article Updates

Enter your email address:

NOTICE:
DO NOT FORGET TO CLICK ON THE VERIFICATION LINK AFTER SUBSCRIBING,THE VERIFICATION MAIL WILL BE SENT TO YOU FROM "FeedBurner Email Subscriptions".
( What is this? Why I need to do this?)

Related Posts

5 responses. Wanna say something?

  1. VJ
    Aug 27, 2009 at 09:24:29
    #1

    How can we reset “KEY” for wireless brodband connection, if somebody has forgotten the existing KEY.

    [Reply]

  2. KP
    Aug 27, 2009 at 20:25:05
    #2

    Try pressing RESET Switch or make software reset for restoring factory settings.

    [Reply]

  3. paul
    Oct 22, 2009 at 00:05:12
    #3

    I’m unable to do it can u plz suggest me clearly with each n every step

    [Reply]

  4. deepa
    Nov 13, 2009 at 14:41:45
    #4

    how to do i change the settings from bridge to multi pc mode.

    [Reply]

  5. KP
    Nov 20, 2009 at 10:16:01
    #5

    Please go to admin panel.
    There you will find an option pppoe, activate that.
    Below it there will be a question about activating bridge mode, select no there.

    [Reply]

Post a Comment

OR